Many white PTFE knitted mesh rolls are displayed.  
 
PTFE knitted mesh is widely used in gas-liquid filtration applications. Working as a filter mesh, PTFE knitted mesh has excellent resistant to chemicals and high temperatures due to its inherent properties and can be used in any kind of chemical media for a long period. However, it has a smooth surface and is not easy to be compressed, therefore, it commonly works with stainless steel woven mesh to enhance its support performance.

 

Material:

Mixed fabric, fibre wire, PTFE wire mesh, PP, PC, PE, etc.
Range:0.10mm-0.55mm (common wire through is: 0.20mm - 0.25mm).
Hole Size: (2x3mm) to (4x5mm) to the (12x6mm) also according to customer requirements on the hole size fine-tuning. The cutout form of the large hole and the orifice cross-arranged (the size of the holes in the longitudinal direction is the same,width is different).
The surface condition of knitted mesh: Flat-type mesh surface and pressed into a corrugated bellows-type network surface (the width of the corrugations and the depth of the different specifications.
The Common Width of knitted mesh: 40mm, 80mm, 100mm, 150mm, 200mm, 300mm, 400mm, 500mm, 600mm, etc.

PTFE mesh is mainly used for processing demister for separation of the gas inside the droplets. Can also be extrusion molding for manufacturing a filtration device.

PTFE Mesh Specification
 

Type	Common Specification
Standard	40-100 60-150 105-300 140-400 160-400 200-570
High efficiency	60-100 80-100 80-150 90-150
	150-300 200-400 300-600
Strong penetration	20-100 30-150 70-400 100-600 170-560
Damping	33-30 38-40 20-40 26-40 30-40
	30-50 48-50 30-60 30-80-50-120

Common categories：

PTFE Knitted Mesh in rolls

PTFE knitted mesh rolls
Wire diameter approximately 0.25 mm
Roll width 305 mm to 310 mm
Herringbone crimp through the mesh

Knitted Mesh

Woven knitted fabric, 100% polyethylene
Made from continuous synthetic lamines of 100% polyethylene, dyed
185 dtex high density
Rectangular profile
In 12.8 cm width rolls